Develop ineo 367 - Target Groups; Symbols and Notations Used in this Manual; Procedural Instruction; Symbols and Notations

2-6 ineo 367/287/227
Introduction to user's guide
2
2.2
2.2.3 Target groups
The user's guides (see page 2-4) are intended for the following users of the system:
Everyone who uses this system must have read and understood the related user's guides.
2.2.4 Symbols and notations used in this manual
Procedural instruction
0 This check mark symbol shows a precondition of a procedure.
1 This format number "1" represents the first step.
2 This format number represents the order of serial steps.
% This symbol indicates a supplementary explanation of a procedural instruction.
Symbols and notations
7WARNING
- Improper handling can cause serious injury or death.
7CAUTION
- Improper handling can cause minor injury or damage to houses and property.
NOTICE
This symbol indicates a risk that may result in damage to this machine or documents. Follow the instructions
to avoid property damage.
Tips
- This symbol indicates supplemental information of a topic as well as options required to use a function.
dReference
This symbol indicates reference functions related to a topic.
User Persons using the system for its intended use (see page 2-3) as well as
managing system functions and consumables according to the assigned
user rights.
Administrator Persons managing consumables, system functions, users and access
rights; adjusting system settings, and establishing network connections.