3-16 ineo 367/287/227
Scan-to-Send function
3
3.2
- For information on the default administrator password, refer to the User’s Guide CD/DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Checking computer information
Check the host address and user ID, and write them down.
1 Display the Properties window of the computer.
% In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and then select [Sys-
tem] in the displayed menu.
% In Windows Vista/7, from the Start menu, select [Computer] - [System properties].
2 Check the computer name, and write it down in the Host address column of the checklist.
3 Open the command prompt.
% In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and then select [Com-
mand Prompt] in the displayed menu.
% In Windows Vista/7, from the Start menu, select [All Programs] - [Accessories] - [Command Prompt].
4 Check the user name, and write it down in the User ID column of the checklist.
Name Entry column Detail
Host Address Host name or IP address to which the scanned data is sent page 3-16
File Path Name of the dedicated folder to receive the scanned data page 3-17
User ID User name required to log in to the computer page 3-16
Password Password required to log in to the computer
• You should not enter this column for security reasons.
Contact your sys-
tem administra-
tor.
To Next Page
Loading...
