2-36 ineo 367/287/227
Loading paper
2
2.8
Loading transparencies
Up to 20 transparencies can be loaded into the tray.
1 Load transparencies in the v direction as shown in the figure
with the print side facing down, then align the Lateral Guide
to the paper.
% Insert transparencies into the tray until their edges are
pressed against the back.
The screen for selecting the paper type and paper size ap-
pears.
2 Change the paper type setting.
% Select [Transparency] from [Paper Type].
3 Change the paper size setting.
% Select the paper size from [Paper Size options] in [Paper Size].
% If the paper size you want to use is not displayed for [Paper Size options], select the paper size from
[Other Size].
To Next Page
Loading...
