Develop ineo 367 - Loading Label Sheets

ineo 367/287/227 2-39
2.8 Loading paper
2
Loading label sheets
Up to 20 label sheets can be loaded into the tray.
1 Load label sheets in the w direction as shown in the figure with
the print side facing down, then align the Lateral Guide to the
paper.
% Insert label sheets into the tray until their edges are
pressed against the back.
The screen for selecting the paper type and paper size ap-
pears.
2 Change the paper type setting.
% Select [Thick 1+] from [Paper Type].
3 Change the paper size setting.
% Select the paper size from [Paper Size options] in [Paper Size].
% If the paper size you want to use is not displayed for [Paper Size options], select the paper size from
[Other Size].