ineo 367/287/227 3-23
3.2 Scan-to-Send function
3
Operation flow
The following describes a transmission flow. For details, refer to page 3-29.
1 Loading the original
2 Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3 Press the Start key.
% Press the Start key to scan the original.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
• For IPv4 environment • For IPv6 environment
To Next Page
Loading...
