Need help?Do you have a question about the DEWESOFT IOLITE Series and is the answer not in the manual?
General| Resolution | 24-bit |
|---|---|
| Isolation | Channel-to-channel, channel-to-ground |
| Connectivity | USB |
| Input Voltage Range | ±10 V |
| Supported Signal Types | Voltage, Current, Thermocouple, RTD, Strain Gauge |
| Dimensions | Varies by model |
| Weight | Varies by model |
Explains manual scope, symbols, and provides links to online resources.
Guides on installing Dewesoft, connecting IOLITE, and configuring settings.
Covers channel setup, sample rate, measurement, and analysis modes.
Details firmware upgrades, licensing, and advanced system setup.
Addresses device detection issues and EtherCAT connectivity problems.
Highlights core features like dual EtherCAT, power, and lists system specifications.
Describes the 19-inch rack-mountable IOLITEr chassis, including renders and dimensions.
Describes the standalone boxed IOLITEs chassis, including renders and dimensions.
Focuses on the IOLITE-GATE module, its connectors, pinouts, and connection procedures.
Overview of 32xDI, 32xDO, and 8xDI-4xDO modules and their specifications.
Details the isolated 8-channel LV module, including BNC and TBLOCK connectors.
Covers RTD modules, specifications, and LEMO/TBLOCK connectors.
Details STG modules, specifications, and DSUB-9 connectors.
Covers TH modules, specifications, and miniature thermocouple connectors.
Details CNT modules, specifications, and LEMO connectors.
Information on available accessories like DSI adapters and sensors for IOLITE systems.
Explains technical terms and abbreviations used throughout the manual.
Covers calibration, support contacts, repair services, and legal rights.
Explains safety symbols, general precautions, environmental, and recycling guidelines.
Lists the versions and changes made to the documentation over time.
To Next Page
