DEWESOFT IOLITE Series - Input Slots and Amplifiers; Redundant Power Supply

IOLITE® 
TECHNICAL REFERENCE MANUAL 


4.1.2. Input Slots and Amplifiers 





IOLITE chassis can be configured with up to 12         
slots, each featuring high-quality input amplifiers.      
Currently, the following amplifiers are available: 

● 6xSTG : universal analogue and strain gage      
amplifiers. Compatible with Dewesoft smart     
interface DSI adapters 
● 8xTH : isolated thermocouple amplifier 
● 32xDI : 32 channel digital input 
● 32xDO : 32 channel digital output with      
watchdog 
● 8xRTD: isolated amplifiers for measurements     
with a resistance temperature detector 


Full technical specifications in 4. Module Overview 

4.1.3. Redundant Power Supply 

Each IOLITE system is equipped with a redundant        
power supply completing the feature set for the        
ideal and reliable front-end system. 

If the primary power supply fails, the system will         
be powered by a secondary power supply without        
any interruption or system shutdown/restart. 
IOLITE® V20-1 24 / 101  