IOLITE®
TECHNICAL REFERENCE MANUAL
5.5.2.2.2. RTD: Resistance 70
5.5.2.2.3. RTD: Temperature 70
5.5.3. RTD-TBLOCK: Terminal block connector 71
5.5.3.1. RTD-TBLOCK: Terminal block connector: Pinout 72
5.6. STG: Strain Gauge Module 73
5.6.1. STG: Specifications 74
5.6.2. STG: DSUB-9 Connector 76
5.6.2.1. STG: DSUB-9 Connector: Pinout 76
5.6.2.2. STG: DSUB-9 Connector: Wiring diagram 77
5.6.2.2.1. STG: Voltage 77
5.6.2.2.2. STG: Potentiometer 77
5.6.2.2.3. STG: Bridge 78
5.6.2.2.4. STG: Current 79
5.7. TH: Thermocouple Module 80
5.7.1. TH: Specifications 81
5.7.2. TH: Miniature Thermocouple Connector 82
5.7.2.1. TH: Miniature Thermocouple Connector: Pinout 82
5.7.2.2. TH: Miniature Thermocouple Connector: Wiring diagram 83
5.7.2.2.1. TH: Voltage 83
5.7.2.2.2. TH: Temperature 83
5.8. CNT: Counter Module 85
5.8.1. CNT: Specifications 86
5.8.2. CNT: LEMO L1B7f Connector 87
5.8.2.1. CNT: LEMO L1B7f Connector: Pinout 88
6. Accessories 89
7. Appendix 90
7.1. Glossary and abbreviations 90
8. Warranty information 95
8.1. Calibration 95
8.2. Support 95
8.3. Service/repair 95
8.4. Restricted rights 95
8.5. Copyright 96
8.6. Trademarks 96
9. Safety instructions 97
9.1. Safety symbols in the manual 97
9.2. General Safety Instructions 97
9.2.1. Environmental considerations 97
9.2.2. Product End-of-Life handling 97
9.2.3. System and components recycling 98
9.2.4. General safety and hazard warnings for all Dewesoft systems 98
IOLITE® V20-1 4 / 101
To Next Page
Loading...
Need help?
General
