Dexcom G7 - Cant See Receiver Screen

l
Bluetooth speaker, earphones, etc.: Verify you're getting your alerts where you
want them.
Issue
Your receiver doesn't make a sound when you get an alert.
Solution
Here are some items to check if you can't hear alerts:
l
Receiver is on: Verify that the receiver is on
l
Alert sounds:
l
Make sure you aren't using Vibrate Only. For more information, go to the
Alerts chapter.
l
Change your alert sounds to one you can hear easily. For more information, go
to the Alerts chapter.
l
Test speakers: Test your receiver speakers regularly by plugging in the receiver
to charge and following the speaker test instructions on the screen, or go to Menu
> Information > Receiver > Speaker Test
Can't see receiver screen
Issue
It’s hard to see what’s displayed on the receiver screen.
Solution
Check these items, in order:
1.
If you’re in bright sunlight, try changing the screen brightness at Menu >
Settings > Display > Screen Brightness or moving to a shaded location.
2.
Turn off screen (either by pushing the Back button or by not pushing any button
for 30 seconds). Then press a receiver button to wake it up and light the screen.
3.
Restart the receiver by pressing the Select button for at least 10 seconds.
100