Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
104
3. Click Network > Interfaces.
4. Select the appropriate WAN or WWAN on which the default DNS test should be disabled..
5. After selecting the WAN or WWAN, click SureLink.
6. Click to expand Tests.
7. Click to expand the default DNSconfigured test.
8. Click to toggle off Enable.
9. Click to add a new test.
10. Type a Label for the test.
11. Click to toggle on IPv6 if the test should apply to both IPv6 rather than IPv4.
12. Select the Test type.
Available test types:
To Next Page
Loading...
