Digi IX10

Interfaces Local Area Networks (LANs)
IX10 User Guide
143
Local Area Networks (LANs)
The IX10 device is preconfigured with the following Local Area Networks (LANs):
Interface
type Preconfigured interfaces Devices Default configuration
Local Area
Network
(LAN)
n
ETH
n
Ethernet:
ETH
n
Firewall zone:
Internal
n
IP Address:
192.168.2.1/24
n
DHCP server
enabled
n
LAN priority:
Metric=5
n
Loopback
n
Ethernet:
Loopback
n
Firewall zone:
Loopback
n
IP address:
127.0.0.1/8
n
Default IP
n
Ethernet:
ETH
n
Firewall zone: Setup
n
IP address
192.168.210.1/24
n
Default Link-local IP
n
Ethernet:
ETH
n
Firewall zone: Setup
n
IP address
169.254.100.100/16
You can modify configuration settings for ETH, and you can create new LANs.
This section contains the following topics:
About Local Area Networks (LANs) 144
Configure a LAN 144
Change the default LAN subnet 151
Change the LAN address type 152
Show LAN status and statistics 154
Delete a LAN 155
DHCP servers 157