Digi IX10

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
142
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the del command to delete the WANor WWAN. For example, to delete a WWANnamed
my_wwan:
(config)> del network interface my_wwan
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.