Firewall Port forwarding rules
IX10 User Guide
750
Configure port forwarding
Required configuration items
n
The network interface for the rule.
Network connections will only be forwarded if their destination address matches the IP
address of the selected network interface.
n
The public-facing port number that network connections must use for their traffic to be
forwarded.
n
The IP address of the server to which traffic should be forwarded.
n
The port or range of ports to which traffic should be forwarded.
Additional configuration items
n
A label for the port forwarding rule.
n
The IP version (either IPv4 or IPv6) that incoming network connections must match.
n
The protocols that incoming network connections must match.
n
A white list of devices, based on either IP address or firewall zone, that are authorized to
leverage this forwarding rule.
To configure a port forwarding rule:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General
