Digi IX10

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
131
3. Click Network > Interfaces.
4. Create the WWAN or select an existing WWAN:
n
To create a new WWAN:
a. For Add interface, type a name for the WWAN and click .
b. For Interface type, select Modem.
New WWANs are enabled by default. To disable, toggle off Enable.
n
To edit an existing WWAN, click to expand the WWAN.
5. For Zone, select External.
6. For Device, select the cellular modem.
7. For Match SIMby, select a SIM matching criteria to determine when this WWAN should be
used:
n
If SIMslot is selected, for Match SIMslot, select which SIM slot must be in active for
this WWAN to be used.
n
If Carrier is selected, for Match SIMcarrier, select which cellular carrier must be in
active for this WWAN to be used.