Digi IX10

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
138
14. Optional IPv4 configuration items:
a. IPv4 support is enabled by default. To disable:
(config network interface my_wwan)> ipv4 enable false
(config network interface my_wwan)>
b. Set the MTU:
(config network interface my_wwan)> ipv4 mtu num
(config network interface my_wwan)>
c. Configure when the WWAN's DNS servers will be used:
(config network interface my_wwan)> ipv4 dns value
(config network interface my_wwan)>
Where value is one of:
n
always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
n
never: Never use DNS servers for this WWAN.
n
primary: Only use the DNS servers provided for this WWAN when the WWAN is the
primary route.
The default setting is primary.
15. Optional IPv6 configuration items:
a. IPv6 support is enabled by default. To disable:
(config network interface my_wwan)> ipv4 enable false
(config network interface my_wwan)>
b. Set the MTU:
(config network interface my_wwan)> ipv4 mtu num
(config network interface my_wwan)>
c. Configure when the WWAN's DNS servers will be used:
(config network interface my_wwan)> ipv4 dns value
(config network interface my_wwan)>
Where value is one of:
n
always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
n
never: Never use DNS servers for this WWAN.
n
primary: Only use the DNS servers provided for this WWAN when the WWAN is the
primary route.
The default setting is primary.