Digi IX10

Interfaces Show SureLink status and statistics
IX10 User Guide
184
2. Use the show surelink openvpn client name command to show the Surelink status of a specific
OpenVPN client, for example:
> show surelink openvpn client test_client1
OpenVPN Client Test Last Response Status
-------------- -------------------- ------------- ------------------
test_client1 194.43.79.74 (Ping) 29 seconds Passed
test_client1 194.43.79.75 (Ping) 5 seconds Passed
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.