Routing IP routing
IX10 User Guide
272
c. Set the interface:
(config network route policy 0)> interface /network/interface/
(config network route policy 0)>
d. Configure the source as the MAC address of the VoIP phone:
i. Set the source type to mac:
(config network route policy 0)> src type mac
(config network route policy 0)>
ii. Set the MACaddress to the MAC address of the VoIP phone:
(config network route policy 0)> src mac 26:88:0E:23:50:C2
(config network route policy 0)>
e. Configure the destination zone:
i. Set the source destination to zone:
(config network route policy 0)> dst type zone
(config network route policy 0)>
ii. Set the zone to CellularWAN:
(config network route policy 0)> dst zone CellularWAN
(config network route policy 0)>
6. Create a packet filtering rule that rejects all other LAN packets on the cellular WANinterface:
a. Create a new packet filtering rule:
i. Type ... to move to the root of the configuration:
(config network route policy 0)> ...
(config)>
ii. Create the packet filtering rule:
(config)> add firewall filter end
(config firewall filter 2)>
b. Set the lable to Reject LAN traffic to cellular WAN:
(config firewall filter 2)> label "Reject LAN traffic to cellular WAN"
(config firewall filter 2)>
c. Set the action to drop:
(config firewall filter 2)> action drop
(config firewall filter 2)>
To Next Page
Loading...
Need help?
General
