Virtual Private Networks (VPN) IPsec
IX10 User Guide
313
3. Click VPN > IPsec.
4. Click to expand Tunnels.
5. For Add IPsec tunnel, type a name for the tunnel and click .
The new IPsec tunnel configuration is displayed.
6. The IPsec tunnel is enabled by default. To disable, toggle off Enable.
7. (Optional) Preferred tunnel provides an optional mechanism for IPsec failover behavior. See
Configure IPsec failover for more information.
8. (Optional) Enable Force UDP encapsulation to force the tunnel to use UDP encapsulation
even when it does not detect that NAT is being used.
9. For Zone, select the firewall zone for the IPsec tunnel. Generally this should be left at the
default of IPsec.
To Next Page
Loading...
Need help?
General
