Digi IX10 User Manual

Virtual Private Networks (VPN) OpenVPN
IX10 User Guide
405
4. Enable SureLink:
(config vpn openvpn client openvpn_client1)> surelink enable true
(config vpn openvpn client openvpn_client1)>
5. By default, the Test DNS servers configured for this interface test is automatically
configured and enabled. This tests communication with DNS servers that are either provided
by DHCP, or statically configured for this interface.
To add additional tests:
a. Add a test:
(config vpn openvpn client openvpn_client1)> add surelink tests end
(config vpn openvpn client openvpn_client1 surelink tests 1)>
b. New tests are enabled by default. To disable:
(config vpn openvpn client openvpn_client1 surelink tests 1)> enable
false
(config vpn openvpn client openvpn_client1 surelink tests 1)>
c. Create a label for the test:
(config vpn openvpn client openvpn_client1 surelink tests 1)> label
string
(config vpn openvpn client openvpn_client1 surelink tests 1)>
d. if the test should apply to both IPv6 rather than IPv4, enable IPv6:
(config vpn openvpn client openvpn_client1 surelink tests 1)> ipv6
true
(config vpn openvpn client openvpn_client1 surelink tests 1)>
e. Set the test type:
(config vpn openvpn client openvpn_client1 surelink tests 1)> test
value
(config vpn openvpn client openvpn_client1 surelink tests 1)>
where value is one of:
n
ping: Uses ICMP to determine connectivity.
If ping is selected, complete the following:
l
Set the ping_method:
(config vpn openvpn client openvpn_client1 surelink tests 1)>
ping_method value
(config vpn openvpn client openvpn_client1 surelink tests 1)>
where value is one of:

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English