Digi IX10 User Manual

Services Configure SSHaccess
IX10 User Guide
494
(config)> service ssh key key.pem
(config)>
5. (Optional) Configure Multicast DNS (mDNS)
mDNS is a protocol that resolves host names in small networks that do not have a DNS server.
mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:
n
To enable the mDNS protocol:
(config)> service ssh mdns enable true
(config>
n
To disable the mDNS protocl:
(config)> service ssh mdns enable false
(config)>
6. (Optional) Set the port number for this service.
The default setting of 22 normally should not be changed.
(config)> service ssh port 24
(config)>
7. To create custom SSHconfiguration settings:
a. Enable custom configurations:
(config)> service ssh custom enable true
(config)>
b. To override the standard SSHconfiguration and only use the config_file parameter:
(config)> service ssh custom override true
(config)>
n
If override is set to true, entries in Configuration file will be used in place of the
standard SSHconfiguration.
n
If override is set to false, entries in Configuration file will be added to the
standard SSHconfiguration.
The default is false.
c. Set the configuration settings:
(config)> service ssh custom config_file value
(config)>
where value is one or more entires in the form of an OpenSSH sshd_config file. For
example, to enable the diffie-helman-group-sha-14 key exchange algorithm:
(config)> service ssh custom config_file "KexAlgorithms +diffie-
hellman-group14-sha1"
(config)>

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English