Services Use the iPerf service
IX10 User Guide
598
Additional configuration Items
n
The port that the IX10 device's iPerf server will use to listen for incoming connections.
n
The access control list for the iPerf server.
When the iPerf server is enabled, the IX10 device will automatically configure its firewall rules
to allow incoming connections on the configured listening port. You can restrict access by
configuring the access control list for the iPerf server.
To enable the iPerf3 server:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > iPerf.
4. Click Enable.
To Next Page
Loading...
Need help?
General
