Digi IX10 User Manual

Applications Develop Python applications
IX10 User Guide
637
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (main, Mar 30 2023, 23:47:13) [GCC 11.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the json submodule:
>>> import json
4. Import the location submodule:
>>> from digidevice import location
5. Print the location data in json format:
>>> geojson_data = location.Location().geojson
>>> print(json.dumps(geojson_data, indent=4))
{
"type": "Feature",
"geometry": {
"type": "Point",
"coordinates" [
44.926195299999998,
-93.397084499999999,
273.20001200000002
]
},
"properties": {
"direction": "None",
"horizontal_velocity": "0.0",
"latitude.deg_min_sec": "44* 54' 45.586\" N",
"longitude.deg_min_sec": "93* 33' 52.334\" W",
"num_satellites": "12",
"quality": "Standard GNSS (2D/3D)",
"selected_source_idx": "0",
"source": "USB (/dev/ttyACM0)",
"source_idx.0.altitude": "273.200012",
"source_idx.0.direction": "None",
"source_idx.0.horizontal_velocity": "0.195489",
"source_idx.0.label": "usb",
"source_idx.0.latitude": "44.902662",
"source_idx.0.latitude.deg_min_sec": "44* 55' 45.065\" N",
"source_idx.0.longitude": "-93.560648",
"source_idx.0.longitude.deg_min_sec": "93* 16' 52.966\" W",
"source_idx.0.num_satellites": "12",
"source_idx.0.quality": "Standard GNSS (2D/3D)",

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English