Digi XBee Product Manual

Full book title 5
Idle Mode 29
Transmit/Receive Modes 29
Sleep Mode 31
Command Mode 33
XBee/XBee-PRO RF Module configuration
Programming the RF Module 36
Programming examples 36
Remote configuration commands 40
Sending a remote command 40
Applying changes on remote 40
Remote command responses 40
Command reference tables 40
Special 41
Networking and security 41
RF interfacing 49
Sleep (low power) 50
Serial interfacing 51
I/O settings 52
Diagnostics 55
AT command options 56
Command descriptions for the XBee/XBee-PRO RF Module 57
A1 (End Device association) command 57
A2 (Coordinator Association) command 58
AC (Apply Changes) command 59
AI (Association Indication) command 59
AP (API Enable) command 60
AS (Active Scan) command 61
BD (Interface Data Rate) command 62
CA (CCA Threshold) command 63
CC (Command Sequence Character) command 63
CE (Coordinator Enable) command 64
CH (Channel) command 64
CN (Exit Command Mode) command 64
CT (Command Mode Timeout) command 65
D0 - D4 (DIOn Configuration) commands 65
D5 (DIO5 Configuration) command 66
D6 (DIO6 Configuration) command 66
D7 (DIO7 Configuration) command 67
D8 (DI8 Configuration) command 67
DA (Force Disassociation) command 68
DB (Received Signal Strength) command 68
DH (Destination Address High) command 68
DL (Destination Address Low) command 69
DN (Destination Node) command 69
DP (Disassociation Cyclic Sleep Period) command 69
EA (ACK Failures) command 70
EC (CCA Failures) command 70
ED (Energy Scan) command 70
EE (AES Encryption Enable) command 71
FP (Force Poll) command 71
FR (Software Reset) command 72
GT (Guard Times) command 72

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm