Digi XBee Product Manual

Full book title 6
HV (Hardware Version) command 72
IA (I/O Input Address) command 72
ID (Pan ID) command 73
IO (Digital Output Level) command 73
IR (Sample Rate) command 74
IS (Force Sample) command 74
IT (Samples before TX) command 74
IU (I/O Output Enable) command 75
KY (AES Encryption Key) command 75
M0 (PWM0 Output Level) command 75
M1 (PWM1 Output Level) command 76
MM (MAC Mode) command 76
MY (16-bit Source Address) command 77
NB (Parity) command 77
ND (Node Discover) command 78
NI (Node Identifier) command 79
NO (Node Discover Options) command 79
NT (Node Discover Time) command 79
P0 (PWM0 Configuration) command 80
P1 (PWM1 Configuration) command 80
PL (Power Level) command 81
PR (Pull-up Resistor) command 81
PT (PWM Output Timeout) command 82
RE (Restore Defaults) command 82
RN (Random Delay Slots) command 82
RO (Packetization Timeout) command 82
RP (RSSI PWM Timer) command 83
RR (XBee Retries) command 83
SC (Scan Channels) command 84
SD (Scan Duration) command 85
SH (Serial Number High) command 85
SL (Serial Number Low) command 85
SM (Sleep Mode) command 86
SO (Sleep Mode command) 86
SP (Cyclic Sleep Period) command 87
ST (Time before Sleep) command 87
T0 - T7 ((D0-D7) Output Timeout) command 88
VL (Firmware Version - Verbose) 88
VR (Firmware Version) command 88
WR (Write) command 88
API Operation for the XBee/XBee-PRO RF Module 89
API frame specifications 89
API types 91
Agency certifications
United States (FCC) 98
OEM labeling requirements 98
FCC notices 98
FCC-approved antennas (2.4 GHz) 99
RF exposure 103
Europe (ETSI) 103
Approved antennas 104
Canada (IC) 105

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm