DIGITAL-LOGIC MICROSPACE PCC-P5 - 7.4 The COM 1;2 Serial Interface Cable

DIGITAL-LOGIC AG PCCP5 Manual V2.3
112
7.4 The COM 1/2 Serial Interface Cable
DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable
2
1
COM1
9pin D-Sub
male
COM1/2
1
6
2
3
4
5
7
8
9
Line of pin 1
9 10
ATTENTION:
- Do not short-circuit these signal lines.
- Never connect any pins either to the same plug or to any other plug on the MICROSPACE
PCC-P5. The +/-10Volt will destroy the MICROSPACE core logic immediately. No warranty in this
case!
- Do not overload the output: max. output current of Maxim converters: 10 mA
- The maximum supply current for the mouse is ~ 5mA!