DIGITAL-LOGIC AG PCCP5 Manual V2.3
136
15 AMIBIOS
®
HIFLEX SETUP DESCRIPTION
The system configuration information and chipset register information is stored in the CMOS RAM. This
information is retained by a battery when the power is off. Enter the BIOS setup (if needed) to modify
this information.
Below is the description on how to enter BIOS setup , and the meaning of each option.
15.1 Entering BIOS Setup
Enter the AMI
®
setup Program's Main Menu as follows:
1.Turn on or reboot the system. The following screen appears with a series of diagnostic check.
AMIBIOS (C) 1996 American Megatrends Inc.,
DIGITAL-LOGIC AG Switzerland xxx
BIOS-Version: 3.20 19980406-0-AA
Hit <DEL> if you want to run setup
(C) American Megatrends Inc.,
51-0100-009999-00101111-071595-AMIBIOS-2H630004-0
2.When the "Hit <DEL>“ message appears, press <DEL> key to enter the BIOS setup screen.
Note: If you don’t want to modify CMOS original setting, don’t press any key;
just wait for the system to boot up.
To Next Page
Loading...