DIGITAL-LOGIC AG PCCP5 Manual V2.3
39
4.7 Download the VGA-BIOS and the CORE-BIOS
Before downloading a BIOS, please check as follows:
- Select the SHADOW option in the BIOS, for a BIOS and VGA (if this option is available).
- Disable the EMM386 or other memory managers in the CONFIG.SYS of your bootdisk.
- Make sure, that the DOWN_xxx.EXE programm and the BIOS to download are on the
same path and directory!
- Boot the DOS without config.sys & autoexec.bat -> press “F5” while starting DOS boot.
- Is the empty diskspace, where the down.exe is located, larger than 64kB (for safe storage)
- Is the floppydisk not write-protected
Start the DOWNLOADING Tool with:
- Start the corresponding download tool. Refer to the table to see which tool fits in, each productgroup has
its own download tool. Do never use the wrong one!
Product: BIOS-Core download VGA-BIOS download BIOS-Ext. download
File-Extension: *.COR *.V40 , *.V45 *.V48
depending on the product
*.BIN
BIOS Size: 128k 32k 32k
Addressrange: E0000 - FFFFFh C0000 – C7FFFh C8000 - CFFFFh
MSM386SN DOWN_3SN.EXE - -
MSM386SV DOWN_3SV.EXE DOWN_3SV.EXE DOWN_3SV.EXE
MSM486SL DOWN_4SN.EXE - -
MSM486SN DOWN_4SN.EXE - -
MSM486SV DOWN_4SV.EXE DOWN_4SV.EXE DOWN_4SV.EXE
MSM486SE / SEV DOWN_4SE.EXE DOWN_4SE.EXE -
MSM486DN DOWN_4DX.EXE - -
MSM486DX DOWN_4DX.EXE DOWN_4DX.EXE DOWN_4DX.EXE
SM-486PC / EK DOWN_SM4.EXE On the –EK : DOWN_SM4.EXE -
SM-486PCX / EK DOWN_S4X.EXE DOWN_S4X.EXE DOWN_S4X.EXE
MSM5x86DX DOWN_4DX.EXE DOWN_4DX.EXE DOWN_4DX.EXE
MSM586SEN / SEV To be defined To be defined
MSM-P5 - AMI82602.EXE or
- FLASHAMI.COM
(AMIBOOT.ROM)**
DOWN_000.EXE -
PCC-P5L / PCC-PII
AMI- BIOS
AMI82602.EXE DOWN_000.EXE -
PCC-P5L / PCC-PII
PCC-P5S / PCC-P3S
PHOENIX- BIOS
PHLASH.EXE
PLATFORM.BIN
DOWN_000.EXE -
MSM-P5S
MSM-P5SV / SEV
AMI- BIOS
AMI82602.EXE DOWN_000.EXE -
MSM-P5SN / SEN
AMI- BIOS
AMI82602.EXE - -
MSM-P5S
MSM-P5SV / SEV
PHOENIX- BIOS
PHLASH.EXE
PLATFORM.BIN
DOWN_000.EXE -
MSM-P5SN / SEN
PHOENIX- BIOS
PHLASH.EXE
PLATFORM.BIN
- -
MSEBX PHLASH.EXE
PLATFORM.BIN
DOWN_000.EXE
SMP5PC / 3PC / DK PHLASH.EXE
PLATFORM.BIN
DOWN_000.EXE
MAS-P5 / P3 PHLASH.EXE
PLATFORM.BIN
DOWN_000.EXE
Remarks:
** Core- file has to be renamed as written in brackets