DIGITAL-LOGIC AG PCCP5 Manual V2.3
139
15.3 Advanced CMOS Setup
1. Press <ENTER> on "Advanced CMOS Setup" of MAIN MENU SCREEN and the screen as
below will display.
AMIBIOS SETUP - ADVANCED CMOS SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Quick Boot Enabled
1
st
Boot Device Floppy
2
nd
Boot Device IDE-0
3
rd
Boot Device Disabled
4
th
Boot Device Disabled
Try Other Boot Devices Yes
S.M.A.R.T. for Hard Disks Disabled
BootUp Num-lock On
PS/2 Mouse Support Enabled
Typematic Rate Fast
System Keyboard Present
Primary Display VGA/EGA
Password Check Setup
Parity Check Disabled
Wait for ‘F1’ If Error Disabled
Hit ‘DEL’ Message Display Enabled
Internal Cache Writeback
External Cache Disabled
System BIOS Cacheable Enabled
C000,16k Shadow Enabled
Available Options:
Disabled
Enabled
ESC: Exit ↑↓:: Sel
PgUp/PgDn: Modify
F2/F3 : Color
2. Use <↑> and <↓> to choose the item. Use <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with Advanced CMOS Setup, press <Esc> to return to the main menu
screen.
15.3.1 A short description of this screen's items follows:
Quick Boot Set this option to Enabled to permit the AMIBIOS to boot within 5 sec-
onds. This option replaces the old Above 1 MB Memory Test option.
1
st
Boot Device This option sets the sequence of boot drives that AMIBIOS attempts to boot
from after AMIBIOS POST completes. The settings are IDE-0 – IDE-3,
FLOPPY, FLOPTICAL, CDROM, SCSI, NETWORK, Disabled.
2
nd
-4
th
Boot Device These options sets the sequence of boot drives after the first device. The
settings are FLOPPY, FLOPTICAL, CDROM, Disabled.
Try Other Boot Devices Set this option to Yes to instruct AMIBIOS to attempt to boot from any other
drive in the system if it cannot find a boot drive among the drives specified in
the 1
st
Boot Device, 2
nd
Boot Device, 3
rd
Boot Device, and 4
th
Boot De-
vice options. The settings are Yes or No.
S.M.A.R.T. for Hard Disks Set this option to Enable to permit the AMIBIOS to use the SMART (Self
Monitoring Analysis and Reporting Technology) protocol for reporting server
system information over a network. The settings are Enabled or Disabled.
BootUp Num-lock Set this option to ON to turn the Num Lock key On at system boot. The set-
tings are ON or OFF. The Optimal and Fail-Safe default settings are ON.
PS/2 Mouse Support Set this option to Enable to enable AMIBIOS support for a PS/2-type mouse.
To Next Page
Loading...
