DIGITAL-LOGIC AG PCCP5 Manual V2.3
142
15.5 Power Management Setup
1. Press <ENTER> on "Power Management Setup" of MAIN MENU SCREEN and the screen
(as below) will display.
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Power Management/APM Disabled
Instant-On Timeout (Minute) Disabled
Green PC Monitor Power State Standby
Video Power Down Mode Standby
Hard Disk Power Down Mode Suspend
Hard Disk Time Out (Minute) Disabled
Standby Time Out (Minute) 1
Suspend Time Out (Minute) 1
Slow Clock Ratio 1:8
IRQ3 Active (at suspend) Ignore
IRQ4 Active (at suspend) Ignore
IRQ5 Active (at suspend) Ignore
IRQ7 Active (at suspend) Ignore
IRQ8 Active (at suspend) Ignore
IRQ9 Active (at suspend) Ignore
IRQ10 Active (at suspend) Ignore
IRQ11 Active (at suspend) Ignore
IRQ12 Active (at suspend) Both
IRQ13 Active (at suspend) Ignore
IRQ14 Active (at suspend) Monitor
Available Options:
Disable
Enabled
Inst-ON
ESC:Exit ↑↓:SEL
PgUp/PgDn:Modify
F2/F3 : Color
2. Use <↑> and <↓> to choose the item. Use <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with Power Management Setup, press <Esc> to return to the main menu
screen.
15.5.1 A short description of this screen's items follows:
Power Management/APM Set this option to Enable to enable the Intel Chipset power management
features and APM (Advanced Power Management). The settings are En-
abled, Disabled or Inst-ON.
Instant-On
Timeout (Minute)
Set this option to Enabled to enable the AMIBIOS support for the Intel In-
stantOn feature. The settings are Disabled or 1-15.
Green PC Monitor Power
State
This option specify the power state that the green PC-compliant video
monitor enters when AMIBIOS places it in a power savings state after the
specified period of display inactivity has expired. The settings are Off,
Standby, Suspend or Disabled.
Video Power Down Mode This option specifies the power conserving state that the VESA VGA video
subsystem enters after the specified period of display inactivity has expired.
the settings are Disabled, Standby or Suspend.
Hard Disk Power
Down Mode
This option specifies the power conserving state that the hard disk drive
enters after the specified period of hard drive inactivity has expired. the set-
tings are Disabled, Standby or Suspend.
Hard Disk Time Out
(Minutes)
This option specifies the length of a period of hard disk drive inactivity.
When this length of time expires, the computer enters power-conserving
To Next Page
Loading...
