EasyManua.ls Logo

DIGITAL-LOGIC MICROSPACE PCC-P5 - 12 INSTALLING THE FLASHDISK DOC2000; 12.1 Enabling and Formatting of the DiskOnChip-Modules

Default Icon
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIGITAL-LOGIC AG PCCP5 Manual V2.3
129
12 INSTALLING THE FLASHDISK DOC2000
On the SSD 36pin socket a DiskOnChip DOC2000 module from M-Systems may be installed with a capacity
of 512k to 12MByte. This device is available from DIGITAL-LOGIC AG.
Operating Systems:
DOS, DL-DOS, RTX-DOS, WIN 3.11, ROM-WIN are working with these drivers.
All other non DOS compatible systems need a driver.
Give attention to the pin 1 orientation in the 32pin SSD socket.
Latest drivers are available at http://www.m-sys.com
12.1 Enabling and Formatting of the DiskOnChip-Modules
Enabling:
No handlings need.
Format:
1. Boot up from the standard floppydisk A: or from a harddisk.
2. Enter the tooldisk from M-Systems containing the formattool DFORMAT.EXE
3. Start format utility
The screen should inform about the status of the flashdisk.
4. Enter the DOS-Bootdisk and transfer the bootfiles with SYS A: C:
From this moment, the flashdisk is now the bootable drive C: and if any harddisk is conencted
it changes to letter D: and E:

Table of Contents

Related product manuals