Need help?Do you have a question about the DIGITAL-LOGIC MICROSPACE PCC-P5 and is the answer not in the manual?
Lists registered trademarks used in the manual and product.
Legal notice disclaiming warranties and liability for product use.
Defines the target audience and required technical knowledge for the manual.
Lists the basic PC/AT compatible elements integrated into the device.
Highlights specific enhancements and unique capabilities of the PCC-P5.
Visual representation of the system's architecture and component connections.
Detailed technical specifications of the PCC-P5 hardware and features.
Presents thermal imaging data for the product under operation.
Lists product codes and available options for ordering.
Records the version, status, and modification details of BIOS releases.
Lists companion documents providing additional technical information and usage guidance.
Provides detailed physical measurements and layout diagrams for the hardware.
Describes the electrical signals and specifications for expansion bus interfaces.
Details the power supply specifications and consumption for the system.
Discusses compatible CPUs, motherboard components, and memory configurations.
Describes the various input/output ports and communication interfaces available.
Explains the function of onboard controllers like interrupt and DMA controllers.
Details the programmable timer devices and their assignments.
Covers BIOS components, memory sockets, and setup procedures.
Provides instructions and procedures for downloading BIOS firmware.
Details onboard DRAM configurations and the system memory address map.
Explains the BIOS data area and its contents for system environment information.
Describes the VGA/LCD controller capabilities and features.
Details HiQ Video capabilities for multimedia capture and display.
Details the pinout and specifications for flat cable connectors.
Lists pin assignments for the power supply connector.
Describes the pinout for the COM1 serial port connector.
Details the pinout for the COM2 serial port connector.
Describes the pinout for the COM2 RS422/485 (4-wire) connector.
Details the pinout for the Ethernet Twisted Pair interface connector.
Lists pin assignments for the 44-pin IDE interface connector.
Details the pinout for the 40-pin IDE interface connector.
Describes the pinout for the floppy disk interface connector.
Details the pinout for the 26-pin micro floppy disk interface connector.
Lists the pin assignments for the LPT1 printer port connector.
Describes the pinout for the PS/2 keyboard connector.
Details the pinout for the VGA-CRT connector.
Lists pin assignments for the VGA-LCD connector.
Describes the pinout for the extended LCD connector.
Details the pinout for the SCSI connector.
Lists the pinout for the Ethernet coax connector.
Describes the pinout for the utility connector.
Details the pinout for the Video ZV Port.
Lists the pin assignments for the Video Input connector.
Describes the pinout for the MIDI/GAME Port connector.
Details the pinout for the Audio Line Input connector.
Lists the pin assignments for the SOUND AUX connector.
Describes the pinout for the Cooler Power and Feedback connector.
Details the pinout for the temperature sensor connector.
Lists the pinout for the Dual USB connector, noting BIOS support limitations.
Describes the pinout for the AUI Interface connector.
Details the pinout for the LAN LED connector.
Lists the pinout for the IDE HDD LED connector.
Describes the pinout for the POWER LED connector.
Details the pinout for the internal speaker connector.
Describes the pinout and signals for the PC/104 BUS Interface.
Details the pinout and signals for the PC/104+ BUS Interface.
Shows the physical locations of jumper blocks on the PCC-P5 board.
Illustrates jumper blocks on the front side of the PCC-P5 board.
Describes jumper configurations on the top and bottom sides of the PCC-P5.
Explains how to select CPU core voltages using jumpers.
Provides jumper settings for different CPU types and clock speeds.
Details jumper settings for selecting different VGA BIOS versions.
Illustrates jumper and connector locations for the PCC-P5 V2.1 version.
Diagram showing jumper locations for the PCC586 V2.1A board.
Illustrates jumper and connector locations for the PCC-P5 V2.2 version.
Diagram showing jumper locations for the PCC-P5 V2.2 board (bottom view).
Illustrates component and connector layout for the PCC-P5 V2.3 version.
Details the pinout and wiring for the floppy disk cable.
Describes the pinout and length limitations for the 40-pin hard disk cable.
Details the pinout for the 44-pin IDE hard disk cable, including connector specifics.
Explains the wiring and precautions for the serial interface cable.
Details special peripherals like multifunction latches for system control.
Explains how to configure Ethernet IO addresses and IRQs using jumpers.
Guides on configuring the Ethernet controller via EEPROM and jumpers.
Lists utilities for EEPROM programming and system diagnostics.
Provides information on obtaining the latest Ethernet drivers.
Details specific functions available via INT 15h for EEPROM and system info access.
Lists available SCSI drivers for various operating systems.
Guides on installing the DOS driver for the ESS sound chip.
Instructions for installing drivers on various Windows and OS/2 versions.
Details the AD1816 sound chip and its driver installation for WIN 3.11.
Lists included applications and utilities bundled with the sound driver.
Provides steps for enabling and formatting DiskOnChip modules.
Guides on initial system power-up and BIOS activity.
Provides troubleshooting steps for boot-time errors and display issues.
Lists POST checkpoints and their descriptions for diagnostics.
Explains how to access the AMIBIOS setup utility.
Details the Standard CMOS Setup screen and its configuration options.
Guides through the Advanced CMOS Setup options for system configuration.
Explains advanced chipset configuration settings available in the BIOS.
Details power management settings to optimize energy consumption.
Covers configuration of PCI slots and Plug and Play devices.
Guides on configuring onboard peripherals like FDC, serial, and parallel ports.
General| Brand | DIGITAL-LOGIC |
|---|---|
| Model | MICROSPACE PCC-P5 |
| Category | Microcontrollers |
| Language | English |
To Next Page
