Digital Projection E-Vision Laser 5000 XGA - OSD Menu Navigation and Settings; OSD Menu Controls; Navigating the OSD

Digital Projection
E-V ISION L ASER 5000 S ERIES U SER M ANUAL R EV A J ANUARY 2018
20
Adjusting the Zoom, Focus and Keystone
1.
Use the Image-zoom control (on the
projector) to resize the projected image.
2.
Use the Image-focus control (on the
front of the lens) to sharpen the projected
image.
3.
Press the / / / buttons (on the
projector or the remote control) to correct
vertical or horizontal image-trapezoid or
press the Keystone button (on the
remote) to selected V (Vertical) or H
(Horizontal) keystone.
Remote control and OSD panel
4.
The keystone control appears on the
display.
Press / to set the V Keystone
image correction.
Press / to set the H Keystone
image correction.
B
A