Digital Projection E-Vision Laser 5000 XGA - Lens Offset

Digital Projection
E-VISION LASER 5000 SERIES USER MANUAL REV A JANUARY 2018
17
Adjusting the Projector Level
Take note of the following when setting up the projector:
 The projector table or stand should be level and sturdy.
 Position the projector so that it is perpendicular to the screen.
 Ensure the cables are in a safe location. Beware of trip hazards.
1.
To raise the level of the projector, twist
the Tilt Adjuster Feet counter clockwise.
2.
To lower the level of the projector, lift the
projector and twist the Tilt Adjuster Feet
clockwise.