Digital Projection E-Vision Laser 5000 XGA - Adjusting the Projector Level

Digital Projection
E-V ISION L ASER 5000 S ERIES U SER M ANUAL R EV A J ANUARY 2018
15
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the OSD
on page 22 and Setting the OSD Language on page 23 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your suppling dealer for information on clearing the password.
1.
Press the MENU button to open the OSD
menu.
2.
Press the cursor  button to move to the
Settings 1 menu, press the cursor 
button to select Advanced 1.
3.
Press (Enter) /  to enter the
Advanced 1 sub menu. Press the cursor
 button to select Security Lock.
4.
Press the cursor  button to enter and
enable or disable security lock function.
A password dialog box automatically
appears.