Digital Projection E-Vision Laser 5000 XGA - 3 D Setting

Digital Projection
E-V ISION L ASER 5000 S ERIES U SER M ANUAL R EV A J ANUARY 2018
34
Alignment
Press the Menu button to open the OSD menu. Press  to move to the Settings 1 menu. Press  to
move to the Alignment menu and then press Enter or . Press  to move up and down in the
Alignment menu.
ITEM DESCRIPTION
Aspect Ratio Press the cursor  button to enter and adjust the video aspect ratio.
Digital Zoom Press the cursor  button to enter and adjust the Digital Zoom menu.
Keystone Press (Enter) /  to enter the keystone menu. See Keystone on page 35.
4 Corner
Press (Enter) /  to enter the 4 Corner sub menu. See 4 Corner on page 35.
Note: Does not function when 3D mode is activated.