Digitalchina Networks DCS-3950 series User Manual

127
DCS-3950 series Ethernet switch manual
7.2.2 VLAN Interface Configuration
7.2.2.1 VLAN Interface Configuration Task List
1. Enter VLAN Mode
2. Configure the IP address for VLAN interface and enable VLAN interface.
1. Enter VLAN Mode
2. Configure the IP address for VLAN interface and enables VLAN interface.
Command Explanation
VLAN Mode
ip address <ip-address> <mask>
[secondary]
no ip address [<ip-address> <mask>]
Configures the VLAN interface IP
address; the ‘no ip address
[<ip-address> <mask>]’ command
deletes the VLAN interface IP address.
VLAN Mode
Shutdown
no shutdown
Enables/Disables VLAN interface
7.2.2.2 Vlan Interface Command List
7.2.2.2.1 interface vlan
Command: interface vlan <vlan-id>
no interface vlan <vlan-id>
Function: Enter VLAN Interface Mode; the ‘no interface vlan <vlan-id>‘ command
deletes existing VLAN interface.
Parameters: <vlan-id> is the VLAN ID for the establish VLAN, the valid range is 1 to
4094.
Command mode: Global Mode.
Usage Guide: None
Example: Enter into the VLAN Interface Mode for VLAN1.
Switch(Config)#interface vlan 1
Switch(Config-If-Vlan1)#
Command Explanation
Global Mode
interface vlan <vlan-id>
no interface vlan <vlan-id>
Enters VLAN Interface Mode; the ‘no
interface vlan <vlan-id>‘ command
deletes specified VLAN interface.

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English