Digitalchina Networks DCS-3950 series User Manual

54
DCS-3950 series Ethernet switch manual
switch.
Switch(Config)#interface vlan 1
Switch(Config-Vlan-1)#ip address 100.100.100.200 255.255.255.0
Switch(Config-Vlan-1)#exit
Switch(Config)#ssh-user test password 0 test
Switch(Config)#ssh-server enable
5.2.3.5 SSH Monitor and Debug Command List
5.2.3.5.1 show ssh-user
Command：show ssh-user
Function：Display all the configured SSH usernames.
Command mode：Admin Mode.
Example:
Switch#show ssh-user
test
Relative Command：ssh-user
5.2.3.5.2 show ssh-server
Command：show ssh-server
Function：Display the state of SSH server (open or closed) and the information of users
who has already logged in.
Command mode：Admin Mode.
Example:
Switch#show ssh-server
ssh-server is enabled
connection version state user name
1 2.0 session started test
Relative Command：ssh-server enable，no ssh-server enable
5.2.3.5.3 debug ssh-server
Command：debug ssh-server
no debug ssh-server
Function：Enable the debug information of SSH server. The ‘no debug ssh-server
‘ command is used to disable the debug information of SSH server.
Default：By default, the debug information is disabled.
Command mode：Admin Mode.
5.2.4 Traceroute

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English