Digitalchina Networks DCS-3950 series User Manual

43
DCS-3950 series Ethernet switch manual
5.1.13 web-user
Command：web-user <username> password {0|7} <password>
no web-user <username>
Function：Set a username and its password for a Web client; the ‘no web-user
<username>‘ command is used to delete this Web client.
Parameters：<username>is an authorized username to do Web access, whose length
should be no more than 16 characters; <password> is the access password, no longer
than 8 characters; 0|7 respectively indicate to display the original or the encrypted
password.
Command mode：Global Mode.
Usage Guide: To prevent un-authorized users from accessing the web interface, user
names and passwords can be created for accessing the web interface through this
command.
Example: Create a user name Admin with switch as its password.
Switch(Config)#web-user Admin password 0 switch
Relative Command: ip http server
5.1.14 write
Command: write
Function: Save the currently configured parameters to the Flash memory.
Command mode: Admin Mode
Usage Guide: With this command, valid configurations can be preserved in the flash. And
system can recover its preserved configuration after system reset. This command has the
same effect as copy running-config startup-config
5.1.15 show cpu usage
Command：show cpu usage
Function：Display the CPU usage rate of the switch
Command mode: Admin Mode.
Usage Guide: load of the system can be presented through this command.
Example:
Switch#show cpu usage
Last 5 second CPU IDLE: 99%
Last 30 second CPU IDLE: 99%
Last 5 minute CPU IDLE: 99%
From running CPU IDLE: 99%

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English