379
DCS-3950 series Ethernet switch manual
25.1.2.3.1 show ip traffic
Command: show ip traffic
Function: Display statistics for IP packets.
Command mode: Admin Mode
Usage Guide: Display statistics for IP and ICMP packets received/sent.
Example:
Switch #show ip traffic
IP statistics:
Rcvd: 896 total, 0 local destination
0 header errors, 0 address errors
0 unknown protocol, 0 discards
Frags: 0 reassembled, 0 timeouts
0 fragment rcvd, 0 fragment dropped
0 fragmented, 0 couldn't fragment, 0 fragment sent
Sent: 1277 generated, 0 forwarded
0 dropped, 0 no route
ICMP statistics:
Rcvd: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp replies
Sent: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0 echo replies
0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp, 0 timestamp replies
TCP statistics:
TcpActiveOpens 2, TcpAttemptFails 0
TcpCurrEstab 1, TcpEstabResets 0
TcpInErrs 0, TcpInSegs 896
TcpMaxConn 0, TcpOutRsts 18
TcpOutSegs 1277, TcpPassiveOpens 0
TcpRetransSegs 262, TcpRtoAlgorithm 0
TcpRtoMax 0, TcpRtoMin 0
UDP statics:
UdpInDatagrams 0, UdpInErrors 0
UdpNoPorts 0, UdpOutDatagrams 0
Displayed information Notes
IP statistics:
IP packet statistics.
Rcvd: 290 total, 44 local destination
0 header errors, 0 address errors
0 unknown protocol, 0 discards
Statistics of total packets received, number
of packets reached local destination,
number of packets have header errors,
number of erroneous addresses, number of
packets of unknown protocols, number of