Digitalchina Networks DCS-3950 series User Manual

40
DCS-3950 series Ethernet switch manual
5.1.3 exec timeout
Command: exec timeout <minutes >
Function: Configure the overtime of quitting privileged configuration mode.
Parameter: < minute >is time; the unit is minute(The range 0~300)
Command mode: Global Mode
Default: The default time is 5 minutes.
Usage Guide: For security reason, a timer can be set for the privileged user’s login
session through this command. And the timer will be enabled when there are no
operations in the login session. When timeout happens, the privileged session will be
terminated automatically. User name and password should be entered again in order to
re-enable the privilege login session. If the timer is set to 0, it will be disabled.
Example: Set the time out limits to 6 minutes:
Switch(Config)#exec timeout 6
5.1.4 exit
Command: exit
Function: Quit from the current mode quit and return the previous mode. By this
command, users being in global mode will return to admin configuration mode; users
being admin mode will return to user mode.
Command mode: All Modes
Example:
Switch#exit
Switch>
5.1.5 help
Command: help
Function: Output brief description of the command interpreter help system.
Command mode: All Modes
Usage Guide: An instant online help provided by the switch. Help command displays
information about the whole help system, including complete help and partial help. The
user can type in any time to get online help.
Example:
Switch>help
enable -- Enable Privileged mode
exit -- Exit telnet session
help -- help
show -- Show running system information

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English