Digitalchina Networks DCS-3950 series User Manual

153
DCS-3950 series Ethernet switch manual
5. Set Trunk port
6. Set Access port
7. Disable/Enable VLAN Ingress Rules
8．Configure Private VLAN
9. Set Private VLAN association
Command Explanation
Interface Mode
switchport mode {trunk|access}
Set the current port as Trunk or Access
port.
Command Explanation
Interface Mode
switchport trunk allowed vlan
{<vlan-list>|all}
no switchport trunk allowed vlan
<vlan-list>
Set/delete VLAN allowed to be crossed
by Trunk. The ‘no’ command restores
the default setting.
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
Command Explanation
Interface Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to specified VLAN
the specified VLANs.
Command Explanation
Global Mode
switchport ingress-filtering
no switchport ingress-filtering
Disable/Enable VLAN ingress rules
Command Explanation
VLAN mode
private-vlan
{primary|isolated|community}
no private-vlan
Configure current VLAN to Private VLAN
Command Explanation
VLAN mode

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English