Digitalchina Networks DCS-3950 series User Manual

196
DCS-3950 series Ethernet switch manual
<vlan-id> ‘command will disalbe IGMP
function on the sepcified vlan.
Ip igmp snooping vlan < vlan-id > limit
{group <g_limit> | source <s_limit>}
No ip igmp snooping vlan < vlan-id >
limit
Set the max number of the groups IGMP
snooping can join and the max number of
sources each group can have.’ No ip igmp
snooping vlan < vlan-id > limit ‘ will reset it
to default value.
Ip igmp snooping vlan <vlan-id>
l2-general-querier
No ip igmp snooping vlan <vlan-id>
l2-general-querier
Set this vlan to a layer 2 general queirer. It
is recommended that each segment should
configure a layer 2 general queirer.’ No ip
igmp snooping vlan <vlan-id>
l2-general-querier’ command will cancel the
configuration of layer 2 general queirer
Ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface
–name>
No ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface
–name>
Set the static mrouter por.’ No ip igmp
snooping vlan <vlan-id> mrouter-port
interface <interface –name>‘command will
cancel the configuration of mrouter port.
Ip igmp snooping vlan <vlan-id> mrpt <
value >
No ip igmp snooping vlan <vlan-id> mrpt
Set the keep-alive time of the mrouter port,
the’ No ip igmp snooping vlan <vlan-id>
mrpt’ command will reset it to default value
Ip igmp snooping vlan <vlan-id>
query-interval <value>
No ip igmp snooping vlan <vlan-id>
query-interval
Set the query interval, ‘No ip igmp snooping
vlan <vlan-id> query-interval ‘ command will
reset it to default value.
Ip igmp snooping vlan <vlan-id>
immediate-leave
No ip igmp snooping vlan <vlan-id>
immediate-leave
Set the IGMP snooping of specified vlan to
enable the immediate-leave function;’ No ip
igmp snooping vlan <vlan-id>
immediate-leave’command will cancel
immediate-leave configuraiton.
Ip igmp snooping vlan <vlan-id>
query-mrsp <value>
No ip igmp snooping vlan <vlan-id>
query-mrsp
Set the max query response time,’ No ip
igmp snooping vlan <vlan-id> query-mrsp’
command command will reset it to default
value.
Ip igmp snooping vlan <vlan-id>
query-robustness <value>
No ip igmp snooping vlan <vlan-id>
query-robustness
Set the robustness, ‘No ip igmp snooping
vlan <vlan-id> query-robustness’ will reset it
to default value.
Ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
No ip igmp snooping vlan <vlan-id>
suppression-query-time
Set the suppression time of query; ‘No ip
igmp snooping vlan <vlan-id>
suppression-query-time’ will reset it to
default value.
ip igmp snooping vlan <vlan-id>
Set the statci group of the specified port,

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English