EasyManuals Logo

Digitalchina Networks DCS-3950 series User Manual

Digitalchina Networks DCS-3950 series
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #210 background imageLoading...
Page #210 background image
200
DCS-3950 series Ethernet switch manual
To use this command, IGMP Snooping of this vlan should be enabled previously.
Example: Switch(config)#ip igmp snooping vlan 2 mrpt 100
Switch(config)#ip igmp snooping vlan 2 mrpt 100
11.2.2.8 ip igmp snooping vlan query-interval
Command: ip igmp snooping vlan <vlan-id> query-interval <value>
no ip igmp snooping vlan <vlan-id> query-interval
Function: Configure this query interval
Parameters: vlan-id: vlan id , ranging between <1-4094>
value: query interval, ranging between <1-65535>seconds
Command mode: Global Mode
Default: 125s
Usage Guide: It is recommended to use the default settings. Please keep this configure in
accordance with IGMP configuration as possible.
Example:
Switch(config)#ip igmp snooping vlan 2 query-interval 130
11.2.2.9 ip igmp snooping vlan query-mrsp
Command: ip igmp snooping vlan <vlan-id> query-mrsp <value>
no ip igmp snooping vlan <vlan-id> query-mrsp
Function: Configure the maximum query response period. The ‘no ip igmp snooping
vlan <vlan-id> query-mrsp’ command restores to the default value
Parameters: vlan-id: vlan id , ranging between <1-4094>
value: query interval, ranging between <10-25> seconds
Command mode:Global Mode
Default: 10s
Usage Guide: It is recommended to use the default settings. Please keep this configure in
accordance with IGMP configuration as possible.
Example: Switch(config)#ip igmp snooping vlan 2 query-mrsp 18
11.2.2.10 ip igmp snooping vlan query-robustness
Command: ip igmp snooping vlan <vlan-id> query-robustness <value>
no ip igmp snooping vlan <vlan-id> query-robustness
Function: Configure the query robustness. The ‘no ip igmp snooping vlan <vlan-id>
query-robustness’ command restores to the default value
Parameters: vlan-id: vlan id , ranging between <1-4094>
value: query interval, ranging between <2-10> seconds
Command mode: Global Mode
Default: query interval is 2
Usage Guide: It is recommended to use the default settings. Please keep this configure in
accordance with IGMP configuration as possible.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digitalchina Networks DCS-3950 series and is the answer not in the manual?

Digitalchina Networks DCS-3950 series Specifications

General IconGeneral
BrandDigitalchina Networks
ModelDCS-3950 series
CategoryNetwork Router
LanguageEnglish