221
DCS-3950 series Ethernet switch manual
13.4.1.3 show ip multicast policy
Command: show ip multicast policy
Function： Display the configured multicast policy.
Parameters： None.
Default：None.
Command mode：Admin Mode
Usage Guide: The command displays multicast policy of configuration
Example:
Switch#show ip multicast policy
ip multicast-policy 10.1.1.0 0.0.0.255 225.0.0.0 0.255.255.255 cos 5
13.4.1.4 show ip multicast source-control
Command: show ip multicast source-control [detail]
show ip multicast source-control interface <Interfacename> [detail]
Function： Display the multicst control configuration.
Parameters： detail：whether display detailed information.
<Interfacename>：interface name，like Ethernet 0/0/1or ethernet 0/0/1。
Default：None.
Command mode：Admin Mode
Usage Guide: The command displays multicast source control rules of configuration,
including detail option, and access-list information applied in detail
Example:
Switch#show ip multicast source-control detail
ip multicast source-control is enabled
Interface Ethernet0/0/1 use multicast source control access-list 5000
access-list 5000 permit ip 10.1.1.0 0.0.0.255 232.0.0.0 0.0.0.255
access-list 5000 deny ip 10.1.1.0 0.0.0.255 233.0.0.0 0.255.255.255
13.4.1.5 show ip multicast destination-control
Command: show ip multicast destination-control [detail]
show ip multicast destination-control interface <Interfacename> [detail]
show ip multicast destination-control host-address <ipaddress> [detail]
show ip multicast destination-control <vlan-id> <mac-address> [detail]
Function：Display the multicast destination configuration
Parameters： detail：whether display detailed information.
<Interfacename>：interface name，like Ethernet 0/0/1 or port-channel 1 or
ethernet 0/0/1。
Default：None.
Command mode：Admin Mode
Usage Guide:
The command displays multicast destination control rules of configuration, including
To Next Page
Loading...
Need help?
General