Digitalchina Networks DCS-3950 series User Manual

245
DCS-3950 series Ethernet switch manual
Notify DCBI is 0
Displayed information Explanation
Global 802.1x Parameters Global 802.1x parameter information
free-resource Free resource
reauth-enabled Whether re-authentication is enabled or not
reauth-period Re-authentication interval
quiet-period Silent interval
tx-period EAP retransmission interval
max-req EAP packet retransmission interval
authenticator mode Switch authentication mode
Mac Filter Enables dot1x address filter or not
MacAccessList : Dot1x address filter table
dot1x-EAPoR Authentication method used by the switch (EAP relay,
EAP local end)
dot1x-privateclient Whether enable private client
dot1x-unicast Whether enable unicast
802.1x is enabled on ethernet
0/0/8
Indicates whether dot1x is enabled for the port
Authentication Method: Port authentication method (MAC-based, port-based)
Status Port authentication status
Port-control Port authorization status
Supplicant Authenticator MAC address
Max User Number Max user number of the port
Notify DCBI Whether has successfully notificated DCBI server or
not.
14.4.1.6 debug aaa error
Command：debug aaa error
no debug aaa error
Function：Enable the debug error information of aaa; the ‘n no debug aaa error’
command is used to disable the debug error information of aaa.
Command mode：Admin Mode
Parameters：None
Usage Guide: None.
Example: Enable debugging for aaa error events.
Switch#debug aaa error
14.4.1.7 debug aaa packet
Command: debug aaa packet {send|receive|all} interface {[ethernet]
<InterfaceName>}

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English