254
DCS-3950 series Ethernet switch manual
[no] {deny | permit} udp {{<sIpAddr>
<sMask>} | any-source | {host-source
<sIpAddr>}} [sPort <s-port>]
{{<dIpAddr> <dMask>} |
any-destination | {host-destination
<dIpAddr>}} [d-port <dPort>]
[precedence <prec>] [tos
<tos>][time-range<time-range-name>]
Creates an extended name-based UDP
IP access rule; the ‘no’ form command
deletes this name-based extended IP
access rule
[no] {deny | permit} {eigrp | gre | igrp |
ipinip | ip | <int>} {{<sIpAddr>
<sMask>} | any-source | {host-source
<sIpAddr>}} {{<dIpAddr> <dMask>} |
any-destination | {host-destination
<dIpAddr>}} [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
Creates an extended name-based IP
access rule for other IP protocols; the
‘no’ form command deletes this
name-based extended IP access rule
c. Exit extended IP ACL configuration mode
Command Explanation
Extended IP ACL Mode
Exit
Exits extended name-based IP ACL
configuration mode
(5) Configuring a numbered standard MAC access-list
Command
Explanation
Global Mode
access-list <num> {deny|permit}
{any-source-mac|{host-source-mac
<host_smac>}|{<smac><smac-mask>}
}
no access-list <num>
Creates a numbered standard MAC
access-list, if the access-list already
exists, then a rule will add to the current
access-list; the ‘no access-list
<num>‘ command deletes a numbered
standard MAC access-list.
(6) Creates a numbered MAC extended access-list
Command Explanation
Global Mode