335
DCS-3950 series Ethernet switch manual
Command Notes
Global Mode
anti-arpscan enable
no anti-arpscan enable
Enable or disable the ARP Scanning
Prevention function globally
2) Configure the threshold of the port-based and IP-based ARP Scanning
Prevention
Command Notes
Global Mode
anti-arpscan port-based threshold <t
hreshold-value>
no anti-arpscan port-based threshol
d
Set the threshold of the
port-based ARP
Scanning Prevention
anti-arpscan ip-based threshold
<threshold-value>
no anti-arpscan ip-based threshold
Disable the setting of the threshold of the
port-based ARP
Scanning Prevention
3) Configure trusted ports
Command Notes
Port Mode
anti-arpscan trust
<port|supertrust-port>
no anti-arpscan trust
<port|supertrust-port>
Set the trust attributes of the ports
4) Configure trusted IP
Command Notes
Global Mode
anti-arpscan trust ip <ip-address
[<netmask>]>
no anti-arpscan trust ip <ip-address
[<netmask>]>
Set attributes of trusted IP.
5) Configure automatic recovery time
Command Notes
Global Mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
Enable or disable the automatic recovery
function
anti-arpscan recovery time <seconds>
no anti-arpscan recovery time
Set automatic recovery time
6) Display relative information of debug information and ARP scanning
Command Notes