Digitalchina Networks DCS-3950 series User Manual

75
DCS-3950 series Ethernet switch manual
set-request PDUs Number of packets received by ‘set’ requests.
snmp packets output Total number of SNMP packet outputs.
too big errors Number of ‘Too_ big’ error SNMP packets.
maximum packet size Maximum length of SNMP packets.
no such name errors Number of packets requesting for non-existent MIB
objects.
bad values errors Number of ‘Bad_values’ error SNMP packets.
general errors Number of ‘General_errors’ error SNMP packets.
response PDUs Number of response packets sent.
trap PDUs Number of Trap packets sent.
5.4.6.1.2 show snmp status
Command: show snmp status
Function: Display SNMP configuration information.
Command mode: Admin Mode
Example :
Switch#show snmp status
System Name: DCS-3950-28CT
System Contact: Digital China Networks Limited
System Location: China
Trap disable
RMON enable
Community Information:
Security IP is Enabled
V1/V2c Trap Host Information:
V3 Trap Host Information:
Displayed information Description
System Name Switch name
System Contact Contact mode
System Location Switch Location
Trap disable Disable Trap Function
RMON enable Enable RMON Function
Community Information Community Information
Security IP is Enabled Enabled Security IP Function
V1/V2c Trap Host Information Receive V1/V2c Trap Host Information

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English