DINO 240RXT
30
14. Working a long time in the same position
- there is a keyswitch for stopping and starting in both the platform and the chassis control
panels
When the weather is warm and the platform is kept for a longer period in the same
position, it is not necessary to let the engine run continuously.
- when the weather is cold, it is recommended to let the engine run to keep the hydraulic oil
warm
- It is recommended to also leave the combustion engine running between the operations, to
ensure the battery remains well charged
- check the stability and condition of the base regularly during the operation, taking into
account the weather and ground conditions
15. When moving the platform, remember the following
- be careful of the high voltage power lines
- do not exceed the max. allowed lateral force (400N)
- do not touch open electric wires
- do not throw objects from the platform
- do not damage the lift
- do not take additional load in the upper position
- do not damage other devices
- do not load the platform vertically more than what is allowed
16. When leaving the lift
- drive the lift to a safe position, preferably to the transport position
- switch off the power unit
- prevent unauthorized use of the lift by removing the ignition key
17. Adjustment of the platform position
To level the platform from the chassis control panel, do the following:
- switch on the power from the chassis control panel
- select the correction movement direction with the control lever
No persons allowed on the platform during adjustment.
The levelling of the platform from the platform control panel:
- switch on the power with the key switch from the platform control panel
- depress the pedal switch and select the desired direction with the control lever
Carry out the adjustment while the boom is in the horizontal position.
Carry out the levelling of the platform while the lift is in the support position (the outriggers down).
BE PREPARED FOR SUDDEN PLATFORM MOVEMENTS!
To Next Page
Loading...
