Dionex ASE 150 - Physical; Pneumatic; Front Panel Display and Keypad; Sample Cells

ASE 150 Operator’s Manual
104 Doc. 065207-02 9/08
A.3 Physical
A.4 Pneumatic
A.5 Front Panel Display and Keypad
A.6 Sample Cells
A.7 Collection Vessels
Dimensions 56 cm high (excluding solvent reservoir) x 36 cm wide x 46 cm
deep (22 in x 14 in x 18 in)
6 cm (2.5 in) clearance required behind the system
Weight 34 kg (75 lb)
Nitrogen 0.97 to 1.38 MPa (140 to 200 psi)
Display Vacuum fluorescence display (VFD)
Keypad Seven buttons for entering commands and selecting screen
parameters
Stainless Steel
Sample Cells
Stainless steel cell bodies and end caps with PEEK seals and
stainless steel frits. Cells are available in the following sizes:
1 mL (actual volume: 1.0 mL)
5 mL (actual volume: 5.0 mL)
10 mL (actual volume: 10.0 mL)
22 mL (actual volume: 22.0 mL)
34 mL (actual volume: 34.0 mL)
66 mL (actual volume: 66.0 mL)
100 mL (actual volume: 99.8 mL)
Zirconium Sample
Cells
Zirconium cell bodies and end caps with PEEK seals and
zirconium frits. Cells are available in the following sizes:
66 mL (66.0 mL actual volume)
100 mL (99.8 mL actual volume)
Collection Vessels 60-mL vials and 250-mL bottles; the cap septum is Teflon-
coated on the solvent side